How to: AIS plugging or Removal for better performance

[botsok]

whoops, my bad. double kill.

look at the first posts bro.

 

[buko0]

look at the first posts bro.

i was confused because my mc is SMX, sir. but now i got it already. done it already, too.

 

[botsok]

i was confused because my mc is SMX, sir. but now i got it already. done it already, too.

classic and smx has same engine, same ais config

 

[mhektheone]

up for the nice tips....

 

[Mono]

@Barurot

you should do this.. i mean you must do this

 

[mhektheone]

@Barurot

you should do this.. i mean you must do this

me too idol...pupping sound when throttle release...

 

[nash smtlc]

want to ask..why after i'm do this mods..my fuel comsumption increase and seem the fuel mixture become rich (plug color become dark)??..do i have to rejetting my carb again??..uma 28mm mj=95 pj=32 + shark 62mm block..thnks

 

[casmot]

i already plugged the ais tube with rubber but i left the small tubing on the top part remain untouched because i can hardly reach it without removing radiator, my question is is it safe

 

[mars allan sanidad]

i already plugged the ais tube with rubber but i left the small tubing on the top part remain untouched because i can hardly reach it without removing radiator, my question is is it safe

i have also tried that bro but it was a failed ais plugging..you really need to close that small pipe as well to complete the ais plugging..or you wont really notice any difference if you have the open pipe you will still experience the popping sound everytime..but when i plugged the small tube the popping sound or back fire during deceleration is gone..maybe once in a while from high speed after releasing the accelerator completely..i noticed a better response when i plugged the ais system..downside is that the carbon deposits on the inside of my pipe seems to develop much faster than when i didn't closed the ais system..

 

[casmot]

thanks mars, one more if i remove the radiator its necessary to drain the fluid right?

 

[mars allan sanidad]

yes you will have to..but i did not removed mine..i just used a very long nose pliers ^_^ to unclip the tubes

 

[mars allan sanidad]

thanks mars, one more if i remove the radiator its necessary to drain the fluid right?

np

 

[buko0]

thanks mars, one more if i remove the radiator its necessary to drain the fluid right?

as per experience i removed my radiator to do this and boom, lots of coolant wasted. be careful in doing this, as to conserve coolant, do some precautionary measures to prevent what happened to me.

 

[casmot]

done, no need to remove radiator to reach that small tubing on top, i just remove my left side fairings to be able to touch it. @ buko0 maybe mx has a different ais construction for you to warrant removal of your radiator, i dont know. mine is a classic

 

[buko0]

done, no need to remove radiator to reach that small tubing on top, i just remove my left side fairings to be able to touch it. @ buko0 maybe mx has a different ais construction for you to warrant removal of your radiator, i dont know. mine is a classic

no its just the same sir, i was just stupid to do it the hard way lol. anyway, i dont have long nose pliers either, so, there.

 

[mars allan sanidad]

no worries wel

no its just the same sir, i was just stupid to do it the hard way lol. anyway, i dont have long nose pliers either, so, there.

come to the pop free open piped snipers ^_^...and more hydrocarbons in the atmosphere...hahaha

 

[chuxkey]

how about stok ..??is better or drop performance...
sory..my english is bad.im from malaysia...

 

[mars allan sanidad]

no worries bro...never tried it chuxkey, but the ais system was designed for the stock muffs with catalytic chamber to burn excess unburned gases, so therefore it is advisable to keep it open than to close it..you might experience something i do not know yet..please comment on this for those who have tried ais plugging with the stock muffler..

 

[chuxkey]

i will ask the expert first...hehe.worried it may lose performnce...but i will try it.how about the fuel..??more saving @ same only..??

 

[mars allan sanidad]

yes we have to seek the experts advice..if you don,t touch the a/f mixture same fuel consumption..tested it my self..