Newbie Question Post It Here!!! [part Vi]

[blackmoon_10]

Mga sir help nmn.. ng punta ako sa 10ave last fri to get my x-1r check since tagal na d na tune up at change oil ung bestfriend ko ayun game na, pina change oil motul 300v factory line, tuneup palit airbox at iridium spark and battery at pinapalitan ko na ng clutch plate at lining and lastly ngpalit na ko ng clucth spring jvt ata ung brand prng overall na eh.. at natapos na kami ng gabi

ok nmn takbo, 3 days after napansin ko may lumalabas na smoke sa tambutso ko at prang nahihirapan tumakbo ung motor at meron na ring backfire at napansin ko napugak sya at pahinto hinto ung motor ko pag tumatakbo parng nabibitin ung rev.. ginawa ko today my shop dto samin sa tondo at pinasuri ko, ang sabi nila ibababa daw ung makina ko at papalitan ung valve kc dun daw ung source ng usok! 1700 pesos labor at lahat na.. sumakit ulo ko imbes na napaganda kc marami binago at pina tune up pa tpos ganto mngyayari! di ko na nabalik sa shop na pinpgawaan ko last fri kc bka lalo masira kc mukhang d marunong mikaneko! nadala na ko..

HELP HELP!!!! mga masters ano input nyo? kc prang d ako naniniwala eh...
SALAMAT sa mga mgbibigay ng say nila...

 

[diego latigo]

Mga sir help nmn.. ng punta ako sa 10ave last fri to get my x-1r check since tagal na d na tune up at change oil ung bestfriend ko ayun game na, pina change oil motul 300v factory line, tuneup palit airbox at iridium spark and battery at pinapalitan ko na ng clutch plate at lining and lastly ngpalit na ko ng clucth spring jvt ata ung brand prng overall na eh.. at natapos na kami ng gabi

ok nmn takbo, 3 days after napansin ko may lumalabas na smoke sa tambutso ko at prang nahihirapan tumakbo ung motor at meron na ring backfire at napansin ko napugak sya at pahinto hinto ung motor ko pag tumatakbo parng nabibitin ung rev.. ginawa ko today my shop dto samin sa tondo at pinasuri ko, ang sabi nila ibababa daw ung makina ko at papalitan ung valve kc dun daw ung source ng usok! 1700 pesos labor at lahat na.. sumakit ulo ko imbes na napaganda kc marami binago at pina tune up pa tpos ganto mngyayari! di ko na nabalik sa shop na pinpgawaan ko last fri kc bka lalo masira kc mukhang d marunong mikaneko! nadala na ko..

HELP HELP!!!! mga masters ano input nyo? kc prang d ako naniniwala eh...
SALAMAT sa mga mgbibigay ng say nila...

boss baka sa carb yan.. hopefully adjustment lang ng carb.. pero antay tayo sa input ng mga master naten.. nangyari na saken yan dati.. carb yung saken tsaka sungaw na pipe.. ^^ tsaka pala sir.. after ka nag pa tune up san ka nag karga ng gasolina.?? ang alam ko me factor din yun sir... HTH

 

[cryptonchiz]

mga boss yung turnilyuhan ng exhaust ng tambutso sa may block ng snipee ko naputol.sumisingaw tska ang ingay tuloy.ano po ggawin ko?pwede pa po ba palitan yun?pa tulong naman po.salamat

 

[rhoitol]

Mga sir help nmn.. ng punta ako sa 10ave last fri to get my x-1r check since tagal na d na tune up at change oil ung bestfriend ko ayun game na, pina change oil motul 300v factory line, tuneup palit airbox at iridium spark and battery at pinapalitan ko na ng clutch plate at lining and lastly ngpalit na ko ng clucth spring jvt ata ung brand prng overall na eh.. at natapos na kami ng gabi

ok nmn takbo, 3 days after napansin ko may lumalabas na smoke sa tambutso ko at prang nahihirapan tumakbo ung motor at meron na ring backfire at napansin ko napugak sya at pahinto hinto ung motor ko pag tumatakbo parng nabibitin ung rev.. ginawa ko today my shop dto samin sa tondo at pinasuri ko, ang sabi nila ibababa daw ung makina ko at papalitan ung valve kc dun daw ung source ng usok! 1700 pesos labor at lahat na.. sumakit ulo ko imbes na napaganda kc marami binago at pina tune up pa tpos ganto mngyayari! di ko na nabalik sa shop na pinpgawaan ko last fri kc bka lalo masira kc mukhang d marunong mikaneko! nadala na ko..

HELP HELP!!!! mga masters ano input nyo? kc prang d ako naniniwala eh...
SALAMAT sa mga mgbibigay ng say nila...

check mo sp malamang factory defect . ano naman kinalaman ng pag usok sa pagpapalit sa clutch. pati carb check mo na din.

mga boss yung turnilyuhan ng exhaust ng tambutso sa may block ng snipee ko naputol.sumisingaw tska ang ingay tuloy.ano po ggawin ko?pwede pa po ba palitan yun?pa tulong naman po.salamat

napapalitan yan paps. weldingan yan ng nut saka unti unti pipihitin paluwag. dalin mo sa magaling na nagwelding para sure ka paps.tanong mo muna sa gagawa kung kaya, marami kase kumita lang kahit hindi kaya. lalong lalala yan.

 

[cryptonchiz]

check mo sp malamang factory defect . ano naman kinalaman ng pag usok sa pagpapalit sa clutch. pati carb check mo na din.

napapalitan yan paps. weldingan yan ng nut saka unti unti pipihitin paluwag. dalin mo sa magaling na nagwelding para sure ka paps.tanong mo muna sa gagawa kung kaya, marami kase kumita lang kahit hindi kaya. lalong lalala yan.

buti naman pede pa.paps hnd pala naputol ng buo meron pa natira,kaya pa kaya phitin ng visegrip yun?naka thread lang ba yun?yung isa paps balak ko din palitan na.

 

[rhoitol]

buti naman pede pa.paps hnd pala naputol ng buo meron pa natira,kaya pa kaya phitin ng visegrip yun?naka thread lang ba yun?yung isa paps balak ko din palitan na.

palagyan mo nalang paps ng nut thru welding, mas madali un.pwede din visegrip, pero pag nakakadalawa ng try, tama na un.

 

[adrian sevilla]

available paba ang yamaha x1-r sa philippines .. im from bulacan san jose del monte san bako pwde kumuha yung pinaka malapit ..?

 

[mac kevin]

tagal na wala akong nakita brandnew x1-r, malakas pa naman makina compared to sniper... may nakita ako repo dito sa amin, available pa cia..

 

[Joreltataynikael]

Sir may available pa bang sniper classic brand new? And kung san kaya makakabili im from meycauayan bulacan tnx po

 

[tabi1]

Can anyone please tell me the specifics of the 2008-2010 X1R's that I see available for sale.
1.) Is the motor the same as say the new Sniper MX?
2.) What transmission are they using?
3.) As for modifications to engine, transmission,,, any issues or can i do the same as I used on our Sniper MX ? Ie, Uma Super head, block, carb,etc? Will the 6 speed transmission fit, or heavy modifications necessary?
4.) Parts for them, are they hard to get?

 

[yves]

Sir may available pa bang sniper classic brand new? And kung san kaya makakabili im from meycauayan bulacan tnx po

try mo s guanzon s dagupan

 

[Joreltataynikael]

try mo s guanzon s dagupan

Layo sir tiga meycauayan bulacan lang po ako pwede po ba yun padala?

 

[jangbest]

Can anyone please tell me the specifics of the 2008-2010 X1R's that I see available for sale.
1.) Is the motor the same as say the new Sniper MX?
2.) What transmission are they using?
3.) As for modifications to engine, transmission,,, any issues or can i do the same as I used on our Sniper MX ? Ie, Uma Super head, block, carb,etc? Will the 6 speed transmission fit, or heavy modifications necessary?
4.) Parts for them, are they hard to get?

Yes you can install Uma Super head, block, carb,etc but the transmiossion of yamaha x1r is diff with sniper mx, the hard parts that are hard to find on x1r is only the fairings ...

 

[tabi1]

Yes you can install Uma Super head, block, carb,etc but the transmiossion of yamaha x1r is diff with sniper mx, the hard parts that are hard to find on x1r is only the fairings ...

@jangbest - thanks for the feedback. I am hearing the x1r is a 4 speed, 1 down 3 up,,,, so if i wanted the 5-speed or 6-speed what would that entail to do the swap, major stuff? Or should i think of just changing the gearing to get the acceleration i want?

Right now just looking at possibilities of another bike and I love the looks of the X1R and the real handlebars. Would appreciate any positives/negatives on them.

 

[jangbest]

@nyr0

Right now just looking at possibilities of another bike and I love the looks of the X1R and the real handlebars. Would appreciate any positives/negatives on them.

Yes! yamaha x1r is 4 speed only but as i remember admin traxx slling a 5 speed tranny for x1r classic

I`m not so expert about yamaha x1r handler bar i think we can ask a feedback from our fellow forumer about it like @nyr

 

[tabi1]

Yes! yamaha x1r is 4 speed only but as i remember admin traxx slling a 5 speed tranny for x1r classic

I`m not so expert about yamaha x1r handler bar i think we can ask a feedback from our fellow forumer about it like @nyr

Roger that,,, I will keep that in mind, i have talked to @nyro a bit already, and I will check with Traxxas.

 

[blackknightrealms]

Does anyone have any idea what is the best match for pj and mj for uma 28 carb?specs is super stock only.where i can possibly find all this pj and mj...thanks in advance who ever can help.

 

[BlackSuede]

pa tulong naman paps ano pwede iset sa sniper mx kahit yung stage 1 na set lang paps ?? ano magandang valve spring at cam sa smx??? salamat sa sasagot ..

 

[yves]

pa tulong naman paps ano pwede iset sa sniper mx kahit yung stage 1 na set lang paps ?? ano magandang valve spring at cam sa smx??? salamat sa sasagot ..

valvspring vixion, cams kawahara k1 or cms

 

[BlackSuede]

valvspring vixion, cams kawahara k1 or cms

cms stage 2 cam kailangan ba ng valve pocket sa mx paps?